BullseyeBore core SUPPORT

General support

QUICK START

• Quick Start Guide Page
• Setup
• Troubleshooting
• Maintenance
• Limited 1-Year Product Warranty
• Safety Guidelines

• Download Quick Start Guide

FAQS

bullseyebore core overview

• 1.1 What Is BullseyeBore Core?

• 2.1 How Does BullseyeBore Core Work?

• 3.1 What Are The BullseyeBore Core Version Differences?

DRILL COMPATIBILITY – WILL BULLSEYEBORE CORE WORK WITH MY DRILL?

• 4.1 Drill Compatibility Overview

• 4.2 How Does BullseyeBore Core Connect To The Drill Chuck?

• 4.3 Will My Keyed Or Keyless Drill Chuck Work With BullseyeBore Core?

• 4.4 Will My Hex Shank Drill Chuck Work With BullseyeBore Core?

• 4.5 Can I Use BullseyeBore Core With A Standard Pneumatic Drill?

• 4.6 Can I Use BullseyeBore Core With A Standard Electric Hammer Drill?

• 4.7 Can I Use BullseyeBore Core With A Rotary Hammer Drill?

• 4.8 What Specific Drills Is BullseyeBore Core Incompatible With?

DRILL BIT COMPATIBILITY – WILL BULLSEYEBORE CORE WORK WITH MY DRILL BITS?

• 5.1 What Is The Maximum Drill Bit Diameter Supported By BullseyeBore Core?

• 5.2 What Is The Drill Bit Length Range Supported By BullseyeBore Core?

• 5.3 Which BullseyeBore Core Version Should I Use With Standard Length Bits Or Longer Bits?

• 5.4 Can The Extended Versions Of BullseyeBore Core Operate With Drill Bits Longer Than 8"?

• 5.5 Does BullseyeBore Core Work With Specialty Drill Bits Such As Spade, Step, Augur, Forstner, Hex Shank, Or Aircraft Bits?

• 5.6 What Specialty Drill Bits Are Incompatible With BullseyeBore Core?

bullseyebore core general faq

• 6.1 What safety guidelines should I follow before, during, and after BullseyeBore Core use?

• 6.2 Does BullseyeBore Core work in any orientation?

• 6.3 Are the Worksurface Patterns Visible through BullseyeBore rotation? 

• 6.4 Does BullseyeBore Core need to be centered on the chuck face for proper use?

• 6.5 Will BullseyeBore Core work outdoors?

• 6.6 Does BullseyeBore Core Require Removal For A Drill Bit Change?

• 6.7 Does BullseyeBore Core Work On Curved Worksurfaces?

• 6.8 How Accurate Are Drill Holes With BullseyeBore Core?

• 6.9 Is BullseyeBore Core Waterproof?

• 6.10 Is BullseyeBore Core Resistant To Chemicals Or Drill Lubricants?

• 6.11 Can I Still Use BullseyeBore Core For Drill Alignment If Only A Portion Of The Patterns Are Visible On The Work Surface?

• 6.12 What Can I Do If The Worksurface Pattern Is Too Large For The Worksurface?

• 6.13 What Causes Projected Laser Pattern Vibration?

• 6.14 Are The BullseyeBore Technologies And Products Patented?

• 6.15 What Happened To The Original “BullseyeBore Disk” Product That Was On Your Website?

BULLSEYEBORE CORE – BATTERIES AND BATTERY Installation

• 7.1 What Type Of Batteries Does BullseyeBore Core Use and How Do I Disassembly the Device and Install Them?

BULLSEYEBORE CORE ACCESSORY - STANDARD CHUCK ALIGNMENT GUIDES

• 8.1 What are the Standard Chuck Alignment Guides used for?

• 8.2 Do I need a Standard Chuck Alignment Guide?

• 8.3 How do I choose the correct size Standard Chuck Alignment Guide?

• 8.4 How do I install a Standard Chuck Alignment Guide on BullseyeBore Core?

BULLSEYEBORE CORE ACCESSORY – CHUCK EXTENSIONS

• 9.1 What are Chuck Extensions and what are they used for?

• 9.2 Do I need a Chuck Extension?

• 9.3 How do I choose the correct size Chuck Extension?

• 9.4 How do I install the Chuck Extension?

• 9.5 Can I stack multiple Chuck Extensions together to create longer Chuck Extension lengths?

• 9.6 What types of drill chucks work with Chuck Extensions?

• 9.7 Do I need a Standard Chuck Guide on BullseyeBore Core when I use a Chuck Extension?

BULLSEYEBORE CORE ACCESSORY – WORKSURFACE EXTENSION PLATE

• 10.1 What are Worksurface Extension Plates?

• 10.2 How can I use a Worksurface Extension Plates in my drilling operations?